description Part666_6
specialize in aftermarket autoparts
4x 1.5inch-5x135 Wheel Spacers 14x2 studs-87.1mm fits Ford Expedition & F-150
Specifications:
Please Make Sure You Take The Proper Measurements Before Purchasing:
Quantity: 4pcs
Vehicle Bolt Pattern: 5x135
Wheel Bolt Pattern: 5x135
Thickness: 1.5\" inch (38mm)
Hubcentric Bore: 87.1
Stud Thread Pitch: 14x2.0
Color: Silver
Compatibility
The compatibility information is for reference
Ford Expedition 2000-2002
Ford F-150 2000-2003
Ford F-150 Heritage 2004
Lincoln Blackwood 2002-2003
Lincoln Navigator 1999-2002 (1999 models need check thread first, could be 14x2 or 12x1.75)
This Item Includes:
4Pcs Wheel Spacers
NOTED：
Please make sure that these are the correct application for your vehicle. We do not guarantee any fitment onto any vehicle,we only guarantee that you will receive the item described as the above. Returns are only accepted if unused and not installed.(Returns ARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)
INSTALLATION TIPS
1.Please Make Sure You Take The Proper Measurements Before Purchasing.
2.Make Sure You Get 5-7 Turns Before Tightening.
3.The Back Of The Adapter Must Sit Flush On The Hub.
What should I pay attention to during installation?
1) Check to make sure that the wheel spacer fits perfectly with the hub/axle stub and the inner mounting surface of the wheel.
2) Make sure that the wheel bolts being used are of the appropriate length, not too long or too short.
3) DO NOT proceed if both of the wheel spacer do not fit.
4) Please be sure to clean the rust on the hub before starting the installation, otherwise it will affect the working life of the spacers.
5) Make sure that you get 5-7 FULL TURNS of the lugs when installing. Torque them down to the manufacturers specs (up to and not greater than 110ft lbs).
6) Avoid using an impact wrench because improper usage may cause the lug nuts/bolts to break or loosen while driving causing a potential injury or accident.
7) All lug nuts, bolts and torque must be checked after driving the first 50 miles after installation. Afterwards, please check all lug nuts and bolts every 3,000-5,000 miles.
8) Alignment is necessary after installation, this will prevent any wobble and vibration from occurring.
How to measure the fender gap to choose suitable thickness?
1) Line up a straight edge ruler against the sidewall of the tire, use the measuring device to measure from the inside of the ruler to the inner fender lip.
2) Please take multiple measurements and use the smallest data point.(The most closest spot may be at the front or rear edge of the fender). The maximum recommended spacer
thickness= the smallest gap - 3/8\"(10mm)
Item Specifics Type Wheel Spacer Adapter Stud Size 14x2 UPC Does Not Apply Surface Finish Aluminum Thickness 1.5 inch Item Condition New Vehicle Bolt Pattern 5x135 Adapter Center Bore 87.1mm Manufacturer Part Number 1.5\" 5x135 M14x2 87.1mm Part Brand 5 Lug Wheel Adapters Style 5 Lug Wheel Spacers Wheel Bolt Pattern 5x135 Other Part Number 1.5\" 5x135 M14x2 87.1mm Warranty Yes Brand KYX Country/Region of Manufacture China Manufacturer Warranty 5 Years Performance Part Yes
Payment
1) We acceptall major credit cards via PayPal: MasterCard, Visa, American Express and Discover.
2) We will only ship to the confirmed PayPal shipping address given with the payment.
3) If you want to ship to other address, please change your PayPal shipping address before you make payment.
4) To avoid initiating an unpaid item claim, please pay within 7 days.
Shipping 1) We will ship item locally for US buyers. Usually for US buyers it will take about 5-7 business days to reach. If you don\'t get it, please contact us firstly, we\'ll try our best to support you. 2) For US customers, all items will be shipped out within 1-2 business days with cleared payment. Please included your phone number to the payment note for prompt and secure shipment. 3) Tracking numbers for all orders are added to once they have been dispatched; please login to to find the tracking information for your order. Returns aa-autoparts offers 5 years warranty.
Our warranty covers the replacement of the part only, DOSE NOT COVER any associated costs in regards to labor or any other expenses incurred or associated with the purchase of the part.
aa-autoparts is not liable for any damages caused by installation or usage of our products. Warranty
The stated warranty term applies only to the above parts purchased from Zoncar.
aa-autopartswarranties the above mentioned products to be free from defects in material and workmanship for a 90 days period from the date the customer receives the item.
This expressed warranty covers only the aforementioned items, their internal parts, seals, O-rings, and gaskets.
BENT SHAFTS, TIE RODS, and HOUSINGS are specifically NOT covered by warranty.
aa-autoparts assumes or accepts NO responsibility for any expenses incurred for the removal or re-installation of the purchased part. There is no expressed or implied warranty for any labor performed. Labor costs are solely the responsibility of the purchaser of the above mentioned parts. The original purchaser of the part will be the only party to which this warranty applies. There is no stipulation of warranty to anyone but the original purchaser. Anyone attempting to execute this warranty that is not the original purchaser of the product will cause the warranty to immediately VOID.
aa-autoparts assumes or accepts no warranty responsibility for the cost of shipping either the defective part or the replacement part.
aa-autoparts, at our option, will replace or repair the warranty part free of charge, and then return the replacement part using the prepaid shipping label provided by the purchaser.
THE LIMITED WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTIES OR ANY KIND, WHETHER STATUTORY, ORAL, WRITTEN, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. THE CONSUMERS EXCLUSIVE REMEDIES FOR BREACH OF WARRANTY AND DETROIT AXLE ONLY OBLIGATION ARISING OUT OF OR IN CONNECTION WITH BREACH OF WARRANTY SHALL BE THOSE STATED HEREIN. WE EXPRESSLY DISCLAIM LIABILITY FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES CAUSED BY THE AUTO PART SOLD.
This warranty gives you specific rights, and you may also have other rights which vary from state to state. In addition, some states do not allow limitations on how long an implied warranty lasts, and some do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, limitations as to these matters contained herein may not apply to you.
DEFINITIONS:
TERMS:
1. Repair or replacement required as a result of any accident, misuse, road hazard, tampering or disassembly.
3. Any aa-autoparts auto part used on an off-road or fleet vehicle.
5. Any aa-autoparts auto part on which the periodic maintenance services required by the original manufacturer have not been performed.
7. Warranty shall not apply to ANY repairs and/or replacements not authorized by aa-autoparts.
LIMITED LIABILITY:
aa-autoparts shall not be liable for any incidental, special, consequential, or exemplary damages, or for any service not expressly provided for herein, relating to or arising from Zoncar products.
This warranty is given in lieu of all other warranties, expressed or implied, including any warranty of merchantability, of fitness for a particular purpose, on the part of aa-autoparts, or the dealer installing the Zoncar product. No dealer, nor any agent or employee thereof, is authorized to extend or enlarge this warranty.
Contact Us
1.Welcome to my shop,We offer an extensive range of products selected by our professionals.superiority in details and quality is a high priority. We also have a high-standard team, qualified by authorized organizations to ensure products are of the highest quality.
2.As an internet seller, we collaborate with excellent international transport companies, we have our own warehouses, offering the most convenient delivery service possible. On-time shipping and reliable quality control are key areas of importance in our shop.
3.We are increasingly expanding US markets based on high quality products, excellent service, reasonable priceboas and timely delivery. Please contact us at any time for more information.We work hard to make sure EVERY CUSTOMER 100% approvingly.
Part666_6
specialize in aftermarket autoparts
10pcs Front Suspension Kit Ball Joints fits 05-10 Jeep Grand Cherokee Commander
Introductions:
Our product is brand new & high quality aftermarket product. Manufactured from top quality components, it is a great value replacement for your old factory Sway Bar. It is durably built and precisely engineered for improved vehicle control. And it is fully tested to ensure a proper fit and performance. With safe, easy installation, it is definitely an ideal option to restore your vehicle\'s air compressor without breaking the bank. Don\'t miss out!
Feature:
- 100% Brand new, high-quality strength steel control arms.
- The control arms are built using advanced processes and premium coatings, to maximize their durability and corrosion resistance.
- Welding is done by robotic arms, uniform thickness, no blow holes, slag, cracks, tearing, or incomplete fusion.
- Measured by specialized inspection tools after welding to make sure assemble hole, bushings insert, and installation sizes are proper.
- Undergo rigorous testing to ensure that long-lasting dependability and strength are built into every part, to ensure a smooth, stable, and safe ride.
FOR:
For jeep COMMANDER 2006 - 2010 All Models
For jeep GRAND CHEROKEE 2005 - 2010 All Models
Kit Includes:
2x Front Upper Control Arm + Ball Joint - K620188
2x Front Lower Ball Joint - K80629
2x Front Stabilizer / Sway Bar End Link - K80861
1x Front Outer Tie Rod End Link (Driver) - ES80643
1x Front Outer Tie Rod End Link (Passenger) - ES80644
2x Front Inner Tie Rod End Link - EV80782
2x Tie Rod Boots & Bellows w/locking c-clamps
What does a control arm do in an automobile? The component serves several purposes.
It connects the wheels to the frame, which adds to a vehicle’s stability. During the times when you drive over rough surfaces on the road, it is the control arms that help to make the ride smooth. The components synchronize the movements of the wheels with that of the frame, helping to dampen vibrations. It does that with the help of the jointed ends.
The control arm purpose does not end there. These components enhance control of a vehicle. By allowing for rotation of the steering knuckle at the ball joint, a driver can steer a vehicle while still moving forward. Control arms allow the wheels to move up and down while keeping them in contact with the ground and stabilizing the vehicle. That way, you do not feel the severity of potholes or bumps. The lower control arm function is not different from that of the upper. Both allow for vehicle control and make rides smooth
Item Specifics Other Part Number Base S Limited Premium North Edition Laredo Bundle Description Includes: 12pc Front Control Arms Ball Joints Kit Custom Bundle Yes Items Included Bushing Manufacturer Part Number 2*K620188 2*K80629 2*K80861 1*ES80643 1*ES80644 2*EV80782 Kit or Single Part Kit Placement on Vehicle Front, Left, Lower, Right, Upper Brand KAC Type Control Arm Kit Interchange Part Number 2*K620188 2*K80629 2*K80861 1*ES80643 1*ES80644 2*EV80782 OE/OEM Part Number 2*K620188 2*K80629 2*K80861 1*ES80643 1*ES80644 2*EV80782 Manufacturer Warranty 5 Year
Payment Shipping Returns Warranty Contact Us
1) We acceptall major credit cards via PayPal: MasterCard, Visa, American Express and Discover.
2) We will only ship to the confirmed PayPal shipping address given with the payment.
3) If you want to ship to other address, please change your PayPal shipping address before you make payment.
4) To avoid initiating an unpaid item claim, please pay within 7 days.
1) We will ship item locally for US buyers. Usually for US buyers it will take about 5-7 business days to reach. If you don\'t get it, please contact us firstly, we\'ll try our best to support you. 2) For US customers, all items will be shipped out within 1-2 business days with cleared payment. Please included your phone number to the payment note for prompt and secure shipment. 3) Tracking numbers for all orders are added to once they have been dispatched; please login to to find the tracking information for your order.
Return Process Guidelines:
①: Contact the seller to inform the reason for return;
②: send pictures (showing product packaging, scanning labels, the product itself and accessories);
③: Get return tag return;
④: the returned goods arrive at the return destination;
⑤: Refund.
(15% of the product price will be charged for returns and exchanges; Incorrect products sent from the warehouse are not subject to return or exchange fees)
Attention:
The freight shall be borne by the Buyer for the following reasons:
①: The buyer has changed his mind and does not want to accidentally place the wrong order;
② : There are more favorable prices.
Return requirements:
①: Items not installed/used in the original package.
② The outer packing is intact.
Please note:
If you find any problem after receiving the goods, please contact us first, we will effectively solve the problem for you in the first time, do not immediately open the return dispute, thank you!
The stated warranty term applies only to the above parts purchased from Zoncar.
aa-autopartswarranties the above mentioned products to be free from defects in material and workmanship for a 90 days period from the date the customer receives the item.
This expressed warranty covers only the aforementioned items, their internal parts, seals, O-rings, and gaskets.
BENT SHAFTS, TIE RODS, and HOUSINGS are specifically NOT covered by warranty.
aa-autoparts assumes or accepts NO responsibility for any expenses incurred for the removal or re-installation of the purchased part. There is no expressed or implied warranty for any labor performed. Labor costs are solely the responsibility of the purchaser of the above mentioned parts. The original purchaser of the part will be the only party to which this warranty applies. There is no stipulation of warranty to anyone but the original purchaser. Anyone attempting to execute this warranty that is not the original purchaser of the product will cause the warranty to immediately VOID.
aa-autoparts assumes or accepts no warranty responsibility for the cost of shipping either the defective part or the replacement part.
aa-autoparts, at our option, will replace or repair the warranty part free of charge, and then return the replacement part using the prepaid shipping label provided by the purchaser.
THE LIMITED WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTIES OR ANY KIND, WHETHER STATUTORY, ORAL, WRITTEN, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. THE CONSUMERS EXCLUSIVE REMEDIES FOR BREACH OF WARRANTY AND DETROIT AXLE ONLY OBLIGATION ARISING OUT OF OR IN CONNECTION WITH BREACH OF WARRANTY SHALL BE THOSE STATED HEREIN. WE EXPRESSLY DISCLAIM LIABILITY FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES CAUSED BY THE AUTO PART SOLD.
This warranty gives you specific rights, and you may also have other rights which vary from state to state. In addition, some states do not allow limitations on how long an implied warranty lasts, and some do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, limitations as to these matters contained herein may not apply to you.
DEFINITIONS:
TERMS:
1. Repair or replacement required as a result of any accident, misuse, road hazard, tampering or disassembly.
3. Any aa-autoparts auto part used on an off-road or fleet vehicle.
5. Any aa-autoparts auto part on which the periodic maintenance services required by the original manufacturer have not been performed.
7. Warranty shall not apply to ANY repairs and/or replacements not authorized by aa-autoparts.
LIMITED LIABILITY:
aa-autoparts shall not be liable for any incidental, special, consequential, or exemplary damages, or for any service not expressly provided for herein, relating to or arising from Zoncar products.
This warranty is given in lieu of all other warranties, expressed or implied, including any warranty of merchantability, of fitness for a particular purpose, on the part of aa-autoparts, or the dealer installing the Zoncar product. No dealer, nor any agent or employee thereof, is authorized to extend or enlarge this warranty.
1.Welcome to my shop,We offer an extensive range of products selected by our professionals.superiority in details and quality is a high priority. We also have a high-standard team, qualified by authorized organizations to ensure products are of the highest quality.
2.As an internet seller, we collaborate with excellent international transport companies, we have our own warehouses, offering the most convenient delivery service possible. On-time shipping and reliable quality control are key areas of importance in our shop.
3.We are increasingly expanding US markets based on high quality products, excellent service, reasonable priceboas and timely delivery. Please contact us at any time for more information.We work hard to make sure EVERY CUSTOMER 100% approvingly.
Related Items:
10Pcs Front Suspension Kit Upper Control Arm Inner Outer Tie Rod End Sway Bar Li
$99.99
10Pcs Front Suspension Kit Lower Upper Control Arm Tie Rod End Adjusting Sleeve
$382.99
10Pcs Front Suspension Kit Lower Upper Control Arm Tie Rod End Adjusting Sleeve
$382.99
