Fuel Pump Module Assembly For 1987 1988 1989 Chrysler Conquest 2.6L for sale

What tools do you need to install a fuel pump?

Safety glasses
A fire extinguisher
Gloves
Brush
Air Compressor
Locking Ring Tool
Rag
Knife
Socket Wrench
1. First remove the negative battery cable and loosen the oil cap box.
2. Cut off the rubber to expose the fuel pump access panel, take the socket wrench and loosen all the bolts around the access panel to expose the module flange.

What tools do you need to install a fuel pump?

Safety glasses
A fire extinguisher
Gloves
Brush
Air Compressor
Locking Ring Tool
Rag
Knife
Socket Wrench

1. First remove the negative battery cable and loosen the oil cap box.

2. Cut off the rubber to expose the fuel pump access panel, take the socket wrench and loosen all the bolts around the access panel to expose the module flange.

3. Disconnect the electrical connector from the fuel module and remove the fuel lines, including the fuel hose and drain device.

Please note that residual fuel pressure will remain in the lines so be sure to use a rag to help restrict fuel injection, then clean around the fuel module opening with compressed air and brush away any excess debris that may have fallen into the tank.

4. Lock the ring tool and loosen the locking ring on the flange and remove the old module assembly from the tank.

5. Use a flashlight to quickly check the bottom of the tank. If there are debris floating at the bottom of the tank, the tank should be cleaned before replacing with a new pump.

6. Clean the tank before replacing the new pump, start replacing the pump, insert the new module into the tank and use the lock ring tool to secure the lock ring to install the module in place.

7. Place and reconnect the fuel hose and drain line, reconnect the electrical connectors.

8. Next reconnect the negative battery cable and tighten the gas cap.

9. Build up pressure in the line by turning the key to the open and closed positions. Perform this task at least three times.

10. Try starting the vehicle and check for leaks around the fuel tank area.

11. If there are no leaks place the access panel on the module flange and tighten the bolts with a socket wrench according to the manufacturer's specifications, put the rubber back into the access port and reinstall the rear seats.

1. Orders processed within 24 hours of payment verification.
2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
3. The images shown are not the actual item and are for your reference only.
4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!

2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
3. We will refund your full winning offer amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from . OR, you may choose to have a replacement.
4. Return shipping is to be paid by the Buyer.

We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! response IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative response, so that we can satisfactorily address your concerns.

What tools do you need to install a fuel pump?

Safety glasses
A fire extinguisher
Gloves
Brush
Air Compressor
Locking Ring Tool
Rag
Knife
Socket Wrench